BICO® mesh

Fiberglass mesh (E-glass type), alkali resistant, coated with a layer of SBR (Styrene-butadiene)

BICOmesh

The fiberglass mesh from BICOmesh range guarantees a durable reinforcement of surfaces with a thick, medium or thin layer of plaster. Our fiberglass mesh is made of “E-glass” yarns and it is primed with an emulsion of Styrene-butadiene specially created for the glass yarn. This compatibility of raw materials offers a high resistance in the alkaline environment of the reinforcement mortar and a lifespan equal to the plasters it reinforces.

The BICO fiberglass mesh is mainly used as reinforcement element in the External Thermal Insulation Composite System (ETICS) based on mineral wool, expanded polystyrene or any other type of thermal insulation board.

BICOmesh

BICO fiberglass mesh complies with the highest national and European quality standards. Our products have an ETA approval (European Technical Assessment – ETA 18/0372 of 07/10/2018) and the quality control compliance in our production environment is periodically certified according to ETA standards ETA (Certificate of Conformity of the Factory Production Control no. 1020-CPR-060048297).

Exterior plasters are exposed to extreme fluctuations in climatic conditions, and BICOmesh fiberglass mesh, with a minimum elongation, even in conditions of exposure to extreme temperature variations, it is the element that reinforces and offers durability to the whole thermal system.

In the case of interior plasters, the BICOmesh fiberglass mesh reinforces and offers flexibility to the support layer it is integrated into, preventing cracks.

BICOmesh PRODUCTS

FIELD OF USE

  • ETICS SYSTEMS

    Reinforcement element in the external thermal insulation composite system (ETICS) based on mineral wool, expanded polystyrene or any other type of thermal insulation board;
  • PLASTERS REINFORCEMENT

    external and internal plaster reinforcement on vertical or horizontal surfaces;
  • FACADE RENEWAL

    manufacture of reinforcement layers for facade renovation;
  • GYPSUM FINISHES

    Reinforcement of plasters with gypsum-based finishes in case of interactions between materials with different expansion coefficients;
  • PANEL REINFORCEMENT

    reinforcement of panels made of different materials (e.g. concrete, gypsum, mortar, EPS);
  • MOSAIC, MARBLE AND NATURAL STONE

    stabilizing element in the assembling of mosaic tiles, marble, or natural stone.

BICOmesh ADVANTAGES

  • high tensile strength and minimum elongation;
  • alkali resistant;
  • high flexibility – it easily adapts to the structure of the support layers it is integrated into;
  • it allows easy and efficient installation;
  • it can be used in any plaster system;
  • it allows a uniform distribution of the plaster layers.

DATA SHEET

FIBERGLASS MESH 160 g/m2 - BICO ETA

EUROPEAN TECHNICAL ASSESSMENT – ETA 18/0372 of 07/10/2018
CERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL NO. 1020-CPR-060048297

DESCRIPTION

Fiberglass mesh (E-glass type), is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). Using a LENO type fabric, the fiberglass mesh with the weight of 160 g/m2 confers resistance to the wall rendering and a lifetime equal to that of the plasters it reinforce.

DESTINATION AND FIELD OF USE

  • Fiberglass mesh with the weight of 160 g/m2 is used as reinforcing element for external thermal insulation system (ETICS) based on mineral wool, expanded polystyrene or other type of thermal insulation board;
  • Reinforcement of interior and exterior plasters, protecting them from cracking;
  • Manufacture of reinforcement layers for facades renovations.

TECHNICAL CHARACTERISTICS

CERTIFICATIONS

Manufacturer S.C. BICO INDUSTRIES S.A. has implemented an integrated management system: quality, environment, occupational health and safety, according to ISO 9001, ISO 14001 and SR OHSAS 18001 - AEROQ certificates.

CLASSIFICATION ACCORDING TO CHEMICAL STANDARDS. POSSIBLE RISKS, PREVENTION REQUIREMENTS

Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, fiberglass reinforcement does not require the safety data sheet.

SPECIFIC CONDITIONS, STORAGE, TRANSPORTATION

  • Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C, protected from the direct radiation of any heat source or from the direct action of the sun's rays;
  • Storage: to be stored in rolls positioned vertically, in covered and appropriate storages;
  • Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation.

FIBERGLASS MESH 145 g/m2 - BICO ETA

EUROPEAN TECHNICAL ASSESSMENT –ETA 18/0372 of 07/10/2018
CERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL NO. 1020-CPR-060048297

DESCRIPTION

Fiberglass mesh (E-glass type), is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). Using a LENO type fabric, the fiberglass mesh with the weight of 145 g/m2 confers resistance to the wall rendering and a lifetime equal to that of the plasters it reinforce.

DESTINATION AND FIELD OF USE

  • Fiberglass mesh with the weight of 145 g/m2 is used as reinforcing element for external thermal insulation system (ETICS) based on mineral wool, expanded polystyrene or other type of thermal insulation board;
  • Reinforcement of interior and exterior plasters, protecting them from cracking;
  • Manufacture of reinforcement layers for facades renovations.

TECHNICAL CHARACTERISTICS

CERTIFICATIONS

The manufacturer S.C. BICO INDUSTRIES S.A. has implemented an integrated management system: quality, environment, occupational health and safety, according to ISO 9001, ISO 14001 and SR OHSAS 18001 - AEROQ certificates.

CLASSIFICATION ACCORDING TO CHEMICAL STANDARDS. POSSIBLE RISKS, PREVENTION REQUIREMENTS

Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, the fiberglass mesh does not require the safety data sheet.

SPECIFIC CONDITIONS, STORAGE, TRANSPORTATION

  • Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C, protected from the direct radiation of any heat source or from the direct action of the sun's rays;
  • Storage: to be stored in rolls positioned vertically, in covered and appropriate storages;
  • Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation.

FIBERGLASS MESH 160 g/m2 - HITROM

AGREMENT TEHNIC NR. 001SC-04/719-2018

DESCRIPTION

Fiberglass mesh (E-glass type), is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). Using a LENO type fabric, the fiberglass mesh with the weight of 160 g/m2 confers resistance to the wall rendering and a lifetime equal to that of the plasters it reinforce.

DESTINATION AND FIELD OF USE

  • Fiberglass mesh with the weight of 160 g/m2 is used as reinforcing element for external thermal insulation system (ETICS) based on mineral wool, expanded polystyrene or other type of thermal insulation board;
  • Reinforcement of interior and exterior plasters, protecting them from cracking;
  • Manufacture of reinforcement layers for facades renovations.

TECHNICAL CHARACTERISTICS

CERTIFICATIONS

The manufacturer S.C. BICO INDUSTRIES S.A. has implemented an integrated management system: quality, environment, occupational health and safety, according to ISO 9001, ISO 14001 and SR OHSAS 18001 - AEROQ certificates.

CLASSIFICATION ACCORDING TO CHEMICAL STANDARDS. POSSIBLE RISKS, PREVENTION REQUIREMENTS

Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, fiberglass reinforcement does not require the safety data sheet.

SPECIFIC CONDITIONS, STORAGE, TRANSPORTATION

  • Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C, protected from the direct radiation of any heat source or from the direct action of the sun's rays;
  • Storage: to be stored in rolls positioned vertically, in covered and appropriate storages;
  • Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation.

FIBERGLASS MESH 145 g/m2 - HITROM

TECHNICAL AGREEMENT – NR. 001SC-04/719-2018

DESCRIPTION

Fiberglass mesh (E-glass type), is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). The fiberglass mesh with a weight of 145 g/m2 confers resistance to the wall rendering and a lifetime equal to that of the plasters it reinforce.

DESTINATION AND FIELD OF USE

  • Fiberglass mesh with the weight of 145 g/m2 is used as reinforcing element for external thermal insulation system (ETICS) based on mineral wool, expanded polystyrene or other type of thermal insulation board;
  • Reinforcement of interior and exterior plasters, protecting them from cracking;
  • Manufacture of reinforcement layers for facades renovations.

TECHNICAL CHARACTERISTICS

CERTIFICATIONS

Manufacturer S.C. BICO INDUSTRIES S.A. has implemented an integrated management system: quality, environment, occupational health and safety, according to ISO 9001, ISO 14001 and SR OHSAS 18001 - AEROQ certificates.

CLASSIFICATION ACCORDING TO CHEMICAL STANDARDS. POSSIBLE RISKS, PREVENTION REQUIREMENTS

Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, fiberglass mesh does not require the safety data sheet.

SPECIFIC CONDITIONS, STORAGE, TRANSPORTATION

  • Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C, protected from the direct radiation of any heat source or from the direct action of the sun's rays;
  • Storage: to be stored in rolls positioned vertically, in covered and appropriate storages;
  • Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation.

FIBERGLASS MESH 125 g/m2

TECHNICAL AGREEMENT NR. 001SC-04/719-2018

DESCRIPTION

Fiberglass mesh is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). Fiberglass mesh with the weight of 125 g/m2 is a significant element in the isolation system, being used as a reinforcing element for surfaces with a thin layer of plaster. It also gives strength to wall rendering and plastering.

DESTNATION AND FIELD OF USE

  • Fiberglass mesh with the weight of 125 g/m2 is used as a reinforcing element for interior and exterior plasters, protecting them from cracking;
  • It is used in manufacture of reinforcement layers for facades renovations.

TECHNICAL CHARACTERISTICS

CERTIFICATIONS

The manufacturer S.C. BICO INDUSTRIES S.A. has implemented an integrated management system: quality, environment, occupational health and safety, according to ISO 9001, ISO 14001 and SR OHSAS 18001 - AEROQ certificates.

CLASSIFICATION ACCORDING TO CHEMICAL STANDARDS. POSSIBLE RISKS, PREVENTION REQUIREMENTS

Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, the fiberglass mesh does not require the safety data sheet.

SPECIFIC CONDITIONS, STORAGE, TRANSPORTATION

  • Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C, protected from the direct radiation of any heat source or from the direct action of the sun's rays;
  • Storage: to be stored in rolls positioned vertically, in covered and appropriate storages;
  • Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation.

FIBERGLASS MESH 90 g/m2

TECHNICAL AGREEMENT NR. 001SC-04/719-2018

DESCRIPTION

Fiberglass mesh is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). Fiberglass mesh with a weight of 90 g/m2 is a significant element in the insulation system, being used as a reinforcing element for surfaces with a thin layer of plaster. It also gives strength to walls rendering and plastering.

DESTNATION AND FIELD OF USE

  • Fiberglass mesh with the weight of 90 g/m2 is used as reinforcing element for interior plasters on vertical and horizontal surfaces;
  • It is applied especially when the finish is based on gypsum and in case of interactions between materials with different expansion coefficients, evenly distributing the stresses to which they are subjected.

TECHNICAL CHARACTERISTICS

CERTIFICATIONS

The manufacturer S.C. BICO INDUSTRIES S.A. has implemented an integrated management system: quality, environment, occupational health and safety, according to ISO 9001, ISO 14001 and SR OHSAS 18001 - AEROQ certificates.

CLASSIFICATION ACCORDING TO CHEMICAL STANDARDS. POSSIBLE RISKS, PREVENTION REQUIREMENTS

Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, the fiberglass mesh does not require the safety data sheet.

SPECIFIC CONDITIONS, STORAGE, TRANSPORTATION

  • Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C, protected from the direct radiation of any heat source or from the direct action of the sun's rays;
  • Storage: to be stored in rolls positioned vertically, in covered and appropriate storages;
  • Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation.

OFFER REQUEST

Loading

TOP